Filter
Top Products
88-3
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 88 CTI Route Point Configuration
CTI Route Point Configuration Settings
Calling Search Space From the drop-down list box, choose a calling search space. The calling
search space specifies the collection of partitions that are searched to
determine how a collected (originating) number should be routed.
You can configure the number of calling search spaces that display in
this drop-down list box by using the Max List Box Items enterprise
parameter. If more calling search spaces exist than the Max List Box
Items enterprise parameter specifies, the Find button displays next to
the drop-down list box. Click the Find button to display the Find and
List Calling Search Space window. Find and choose a calling search
space name (see the
“Finding a Calling Search Space” section on
page 53-3).
Note To set the maximum list box items, choose System > Enterprise
Parameters and choose CCMAdmin Parameters.
Location Use locations to implement call admission control (CAC) in a
centralized call-processing system. CAC enables you to regulate audio
quality and video availability by limiting the amount of bandwidth that
is available for audio and video calls over links between locations. The
location specifies the total bandwidth that is available for calls to and
from this location.
From the drop-down list box, choose the appropriate location for this
CTI route point.
A location setting of Hub_None means that the locations feature does
not keep track of the bandwidth that this CTI route point consumes. A
location setting of Phantom specifies a location that enables successful
CAC across intercluster trunks that use H.323 protocol or SIP.
To configure a new location, use the System > Location menu option.
For more details about locations, see the “Location Configuration”
section on page 17-1. For an explanation of location-based CAC across
intercluster trunks, see “Location-Based Call Admission Control Over
Intercluster Trunk” in the Cisco Unified Communications Manager
System Guide.
User Locale From the drop-down list box, choose the locale that is associated with
the CTI route point. The user locale identifies a set of detailed
information to support users, including language and font.
Cisco Unified Communications Manager makes this field available only
for CTI route points that support localization.
Note If no user locale is specified, Cisco Unified Communications
Manager uses the user locale that is associated with the device
pool.
Note If the users require that information be displayed (on the phone)
in any language other than English, verify that the locale
installer is installed before configuring user locale. Refer to the
Cisco Unified Communications Manager locale installer that is
in the Cisco Unified Communications Operating System
Administration Guide.
Table 88-1 CTI Route Point Configuration Settings (continued)
Field Description