Filter
Top Products
90-16
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Gateway Configuration Settings
Codec For Outbound
FastStart
Use the drop-down list box to choose the codec for use with the H.323
device for an outbound FastStart call:
• G711 u-law 64K (default)
• G711 a-law 64K
• G723
• G729
• G729AnnexA
• G729AnnexB
• G729AnnexA-AnnexB
Note When you check the Enable Outbound FastStart check box, you
must choose the codec for supporting outbound FastStart calls.
You may need to click Save prior to choosing the Codec For
Outbound FastStart.
Called Party Transformation
CSS
This setting allows you to localize the called party number on the
device. Make sure that the Called Party Transformation CSS that you
choose contains the called party transformation pattern that you want
to assign to this device.
Note If you configure the Called Party Transformation CSS as None,
the transformation does not match and does not get applied.
Ensure that you configure the Called Party Transformation CSS
in a non-null partition that is not used for routing.
Use Device Pool Called Party
Transformation CSS
To use the Called Party Transformation CSS that is configured in the
device pool that is assigned to this device, check this check box. If you
do not check this check box, the device uses the Called Party
Transformation CSS that you configured in the H.323 Gateway
Configuration window.
Calling Party Transformation
CSS
This setting allows you to localize the calling party number on the
device. Make sure that the Calling Party Transformation CSS that you
choose contains the calling party transformation pattern that you want
to assign to this device.
Tip Before the call occurs, the device must apply the
transformation by using digit analysis. If you configure the
Calling Party Transformation CSS as None, the transformation
does not match and does not get applied. Ensure that you
configure the Calling Party Transformation Pattern in a
non-null partition that is not used for routing.
Use Device Pool Calling
Party Transformation CSS
To use the Calling Party Transformation CSS that is configured in the
device pool that is assigned to this device, check this check box. If you
do not check this check box, the device uses the Calling Party
Transformation CSS that you configured in the H.323 Gateway
Configuration window.
Table 90-2 H.323 Gateway Configuration Settings (continued)
Field Description