Filter
Top Products
47-7
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 47 Hunt Pilot Configuration
Hunt Pilot Configuration Settings
Calling Line ID
Presentation
Cisco Unified Communications Manager uses calling line ID
presentation (CLIP/CLIR) as a supplementary service to allow or restrict
the originating caller phone number on a call-by-call basis.
Choose whether you want the Cisco Unified Communications Manager
to allow or restrict the display of the calling party phone number on the
called party phone display for this hunt pilot.
Choose Default if you do not want to change calling line ID presentation.
Choose Allowed if you want Cisco Unified Communications Manager to
allow the display of the calling number. Choose Restricted if you want
Cisco Unified Communications Manager to block the display of the
calling number.
For more information about this field, see Table 17-8 in the “Calling
Party Number Transformations Settings” section in the Cisco Unified
Communications Manager System Guide.
Calling Name Presentation Cisco Unified Communications Manager uses calling name presentation
(CNIP/CNIR) as a supplementary service to allow or restrict the
originating caller name on a call-by-call basis.
Choose whether you want the Cisco Unified Communications Manager
to allow or restrict the display of the calling party name on the called
party phone display for this hunt pilot.
Choose Default if you do not want to change calling name presentation.
Choose Allowed if you want Cisco Unified Communications Manager to
display the calling name information. Choose Restricted if you want
Cisco Unified Communications Manager to block the display of the
calling name information.
For more information about this field, see Table 17-8 in the “Calling
Party Number Transformations Settings” section in the Cisco Unified
Communications Manager System Guide.
Table 47-1 Hunt Pilot Configuration Settings (continued)
Field Description