Filter
Top Products
105-3
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 105 Recording Profile Configuration
Configuring a Recording Profile
Configuring a Recording Profile
To configure a recording profile, use the following procedure.
Procedure
Step 1 Choose Device > Device Settings > Recording Profile.
The Find and List Recording Profiles window displays.
Step 2 Perform one of the followings tasks:
• To add a new recording profile, click the Add New button and continue with Step 3.
• To update an existing recording profile, locate the appropriate recording profile as described in
“Finding a Recording Profile” section on page 105-2 and continue with Step 3.
Step 3 Enter the appropriate settings as described in Table 105-1.
Step 4 Click Save.
Additional Information
See the “Related Topics” section on page 105-4.
Deleting a Recording Profile
To delete a recording profile, use the following procedure.
Before You Begin
You cannot delete a recording profile that a line appearance uses. To find out which line appearances are
using the recording profile, choose Dependency Records from the Related Links drop-down list box that
is on the Recording Profile Configuration window. If the dependency records are not enabled for the
system, the dependency records summary window displays a message. For more information about
dependency records, see the
“Accessing Dependency Records” section on page A-2. If you try to delete
a recording profile that is in use, Cisco Unified Communications Manager displays a message. Before
deleting a recording profile that is currently in use, you must perform either or both of the following
tasks:
• Assign a different recording profile to any line appearances that are using the recording profile that
you want to delete.
• Delete the line appearances that are using the recording profile that you want to delete.
Procedure
Step 1 To locate the recording profile that you want to delete, follow the procedure in “Finding a Recording
Profile” section on page 105-2.
Step 2 Check the check box next to the recording profiles that you want to delete. To select all the recording
profiles in the window, check the check box in the matching records title bar.
Step 3 Click Delete Selected.