Filter
Top Products
47-3
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 47 Hunt Pilot Configuration
Hunt Pilot Configuration Settings
Route Filter If your hunt pilot includes the @ wildcard, you may choose a route filter.
The optional act of choosing a route filter restricts certain number
patterns.
The route filters that display depend on the numbering plan that you
choose from the Numbering Plan drop-down list box.
You can configure the number of items that display in this drop-down list
box by using the Max List Box Items enterprise parameter. If more route
filters exist than the Max List Box Items enterprise parameter specifies,
the Find button displays next to the drop-down list box. Click the Find
button to display the Find and List Route Filters window. Find and
choose a route filter name by using the
Finding a Route Filter procedure
in the Cisco Unified Communications Manager Administration Guide.
Note To set the maximum list box items, choose System > Enterprise
Parameters and choose Unified CMAdmin Parameters.
MLPP Precedence Choose an MLPP precedence setting for this hunt pilot from the
drop-down list box:
• Executive Override—Highest precedence setting for MLPP calls.
• Flash Override—Second highest precedence setting for MLPP calls.
• Flash—Third highest precedence setting for MLPP calls.
• Immediate—Fourth highest precedence setting for MLPP calls.
• Priority—Fifth highest precedence setting for MLPP calls.
• Routine—Lowest precedence setting for MLPP calls.
• Default—Does not override the incoming precedence level but
rather lets it pass unchanged.
Note Refer to the “Precedence” section in the “Multilevel Precedence
and Preemption” chapter of the Cisco Unified Communications
Manager Features and Services Guide for more information.
Hunt List Choose the hunt list for which you are adding a hunt pilot from the
drop-down list box.
After you choose a hunt list, click the Edit link to the right to edit the hunt
list.
Table 47-1 Hunt Pilot Configuration Settings (continued)
Field Description