Filter
Top Products
64-19
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 64 Directory Number Configuration
Directory Number Configuration Settings
Visual Message Waiting
Indicator Policy
Use this field to configure the handset lamp illumination policy. Choose one of the following
options:
• Use System Policy (The directory number refers to the service parameter “Message
Waiting Lamp Policy” setting.)
• Light and Prompt
• Prompt Only
• Light Only
• None
Setting applies only to the current device unless you check the check box at right (Update
Shared Device Settings) and click the Propagate Selected button. (The check box at right
displays only if other devices share this directory number.)
Audible Message Waiting
Indicator Policy
Use this field to configure an audible message waiting indicator policy. Choose one of the
following options:
• Off
• On—When you select this option, you will receive a stutter dial tone when you take the
handset off hook.
• Default—When you select this option, the phone uses the default that was set at the
system level.
Ring Setting (Phone Idle) Use this field to configure the ring setting for the line appearance when an incoming call is
received and no other active calls exist on that device. Choose one of the following options:
• Use system default
• Disable
• Flash only
• Ring once
• Ring
Setting applies only to the current device unless you check the check box at right (Update
Shared Device Settings) and click the Propagate Selected button. (The check box at right
displays only if other devices share this directory number.)
Note Turning on MLPP Indication (at the enterprise parameter, device pool, or device level)
disables normal Ring Setting behavior for the lines on a device, unless MLPP
Indication is turned off (overridden) for the device.
Table 64-1 Directory Number Configuration Settings (continued)
Field Description