Filter
Top Products
12-5
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 12 DHCP Server Configuration
Configuring a DHCP Server
Configuring a DHCP Server
This section describes how to add, copy, and update a DHCP server address to the Cisco Unified
Communications Manager database.
Procedure
Step 1 Choose System > DHCP > DHCP Server
Step 2 Perform one of the following tasks:
• To add a DHCP server, click Add New.
• To update a server, find the server by using the procedure in the “Finding a DHCP Server” section
on page 12-4.
• To copy a server, find the server by using the procedure in the “Finding a DHCP Server” section on
page 12-4, select the DHCP server that you want by checking the check box next to the server name,
and click the Copy icon.
The DHCP Server Configuration window displays.
Step 3 Enter the appropriate settings as described in Table 12-1.
Step 4 Click the Save icon that displays in the tool bar in the upper, left corner of the window (or click the Save
button that displays at the bottom of the window) to save the data and to add the server to the database.
Additional Information
See the “Related Topics” section on page 12-6.
Deleting a DHCP Server
This section describes how to delete a DHCP server from the Cisco Unified Communications Manager
database.
Procedure
Step 1 Find the DHCP server by using the procedure in the “Finding a DHCP Server” section on page 12-4.
Step 2 From list of matching records, choose the DHCP server that you want to delete.
Step 3 Click the Delete Selected icon that displays in the tool bar in the upper, left corner of the window (or
click the Delete Selected button that displays at the bottom of the window) to delete the server.
If the server is not in use, Cisco Unified Communications Manager deletes it. If it is in use, an error
message displays.
Note You can delete multiple host servers from the Find and List Servers window by checking the
check boxes next to the appropriate servers and clicking Delete Selected. You can delete all
servers in the window by clicking Select All and then clicking Delete Selected.