Filter
Top Products
3-6
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 3 Cisco Unified Communications Manager Configuration
Updating a Cisco Unified Communications Manager
Updating a Cisco Unified Communications Manager
This section describes how to update a Cisco Unified Communications Manager.
Procedure
Step 1 Choose System > Cisco Unified CM.
The Find and List Cisco Unified CMs window displays.
Step 2 To update a Cisco Unified Communications Manager, locate the appropriate Cisco Unified
Communications Manager as described in
“Finding a Cisco Unified Communications Manager” section
on page 3-4. Click the Cisco Unified Communications Manager that you want to update and continue
with Step 3.
Step 3 Enter the appropriate settings as described in Table 3-1.
Step 4 Click Save.
Additional Information
See the “Related Topics” section on page 3-8.
Synchronizing a Cisco Unified Communications Manager With
Devices
To synchronize a Cisco Unified Communications Manager that has undergone configuration changes
with its corresponding registered devices, perform the following procedure, which will apply any
outstanding configuration settings in the least-intrusive manner possible. (For example, a reset/restart
may not be required on some affected devices.)
Procedure
Step 1 Choose System > Cisco Unified CM.
The Find and List Cisco Unified CMs window displays.
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of Cisco Unified CMs that match the search criteria.
Step 4 Click the Cisco Unified Communications Manager that you want to synchronize with its devices.
Step 5 Make any additional configuration changes.
Step 6 Click Save.
Step 7 Click Apply Config.
The Apply Configuration Information dialog displays.
Step 8 Click OK.