Filter
Top Products
2-8
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 2 Server Configuration
Related Topics
Tip For example, if you have a version 7.1(2) disk, perform a 7.1(2) installation on the node. If you
have a disk with a compatible version of 5.X on it, for example, use the disk to install
Cisco
Unified CM on the subsequent node; during the installation, choose the Upgrade During
Install option when the installation displays the options.
Make sure that the version that you install on the subsequent node matches the version that runs
on the first node (publisher) in the cluster.
If the first node in the cluster runs Cisco Unified Communications Manager 7.1(2) version and
a service update (or engineering special), you must choose the Upgrade During Install option
when the installation displays the installation options; before you choose this option, ensure that
you can access the service update (or engineering special) image on DVD or a remote server. For
more information on how to perform an installation, refer to installation documentation that
supports your version of Cisco Unified Communications Manager.
Step 3 After you install Cisco Unified CM, configure the subsequent node, as described in the installation
documentation that supports your version of Cisco Unified
CM.
Step 4 Access the Cisco Unified Reporting, RTMT, or the CLI to verify that database replication is occurring
between existing nodes; if necessary, repair database replication between the nodes.
Additional Information
See the “Related Topics” section on page 2-8.
Related Topics
• Server Configuration Settings, page 2-1
• Finding a Server, page 2-4
• Configuring a Server, page 2-5
• Deleting a Server, page 2-6
• Cisco Unified Communications Manager Configuration, page 3-1
• Internet Protocol Version 6 (IPv6), Cisco Unified Communications Manager Features and Services
Guide
• Changing the IP Address and Host Name for Cisco Unified Communications Manager Release
7.1(2)