Filter
Top Products
83-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 83 Cisco Voice-Mail Port Configuration
Cisco Voice-Mail Port Configuration Settings
Table 83-1 describes the Cisco voice-mail port configuration settings. For more information about
related procedures, see the “Related Topics” section on page 83-9.
Table 83-1 Cisco Voice-Mail Port Configuration Settings
Field Description
Device Information
Port Name Enter a name to identify the Cisco voice-mail port. You must add a
device for each port on Cisco voice-messaging system. If 24 ports exist,
you must define 24 devices.
The Port Name field allows 1 to 15 characters, which can include
letters, numbers, periods, underscores, and dashes, followed by -VI and
the port number.
Note For Cisco Unity, this name must match the name in the Unity
Telephony Integration Manager (UTIM), such as Cisco
UM-VI1 or Cisco UM-VI2. For Cisco
Unity Connection, this
name must match the name in Cisco
Unity Connection
Administration, such as Cisco UM-VI1 or Cisco UM-VI2.
Description Enter the purpose of the device.
Device Pool Choose the default value or a specific device pool.
Common Device
Configuration
Choose the common device configuration to which you want this device
assigned. The common device configuration includes the attributes
(services or features) that are associated with a particular user.
Common device configurations are configured in the Common Device
Configuration window. See
Common Device Configuration for more
information.
Calling Search Space From the drop-down list box, choose the appropriate calling search
space. A calling search space comprises a collection of partitions that
are searched for numbers that were called from this device. Choose the
name of the calling search space that allows calls to the subscriber
phones and to any network devices.
You can configure the number of calling search spaces that display in
this drop-down list box by using the Max List Box Items enterprise
parameter. If more calling search spaces exist than the Max List Box
Items enterprise parameter specifies, the ellipsis button (...) displays
next to the drop-down list box. Click the
... button to display the Select
Calling Search Space window. Enter a partial calling search space name
in the List items where Name contains field. Click the desired calling
search space name in the list of calling search spaces that displays in
the Select item to use box and click OK.
Note To set the maximum list box items, choose System >
Enterprise Parameters and choose CCMAdmin Parameters.
AAR Calling Search Space Choose the appropriate calling search space for the device to use when
automated alternate routing (AAR) is performed. The AAR calling
search space specifies the collection of route partitions that are
searched to determine how to route a collected (originating) number
that is otherwise blocked due to insufficient bandwidth.