Filter
Top Products
CHAPTER
92-1
Cisco Unified Communications Manager Administration Guide
OL-18611-01
92
Trunk Configuration
Use a trunk device to configure a logical route to a gatekeeper (that is, the wholesale network or an
intercluster trunk with gatekeeper control), to an intercluster trunk without a gatekeeper, or to a SIP
network. Choose from the following available trunk types:
• H.225 trunk (gatekeeper controlled)
• Intercluster trunk (gatekeeper controlled)
• Intercluster trunk (non-gatekeeper controlled)
• SIP trunk
The following topics cover Cisco Unified Communications Manager trunk configuration:
• Trunk Configuration Settings, page 92-1
• Finding a Trunk, page 92-46
• Configuring a Trunk, page 92-48
• Deleting a Trunk, page 92-49
• Resetting a Trunk, page 92-49
• Synchronizing a Trunk, page 92-50
• Related Topics, page 92-51
Trunk Configuration Settings
Use a trunk device to configure a logical route to a gatekeeper (that is, the wholesale network or an
intercluster trunk with gatekeeper control), to an intercluster trunk without a gatekeeper, or to a SIP
network. Choose from the following available trunk types:
• H.225 trunk (gatekeeper controlled)
• Intercluster trunk (gatekeeper controlled)
• Intercluster trunk (non-gatekeeper controlled)
• SIP trunk
Tip Configure SIP Trunk Security Profiles and SIP Profiles before you configure a SIP Trunk. For more
information, see the
“Configuring SIP Profiles” section on page 101-10, SIP Trunk Security Profile
Configuration, and the Cisco Unified Communications Manager Security Guide.