Filter
Top Products
91-20
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 91 Cisco Unified IP Phone Configuration
Phone Configuration Settings
Generate String If you want Cisco Unified Communications Manager Administration to generate a
hexadecimal string for you, click the Generate String button.
Revert to Database Value If you want to restore the value that exists in the database, click this button. This button proves
useful if you enter an error in the Symmetric Key field before you save the configuration.
H.323 Information
Outgoing Caller ID Pattern For outgoing calls to the H.323 Client, enter the pattern, from 0 to 24 digits, that you want to
use for caller ID.
Calling Party Selection Choose the directory number that is sent on an outbound call to the H.323 Client.
The following options specify which directory number is sent:
• Originator—Send the directory number of the calling device.
• First Redirect Number—Send the directory number of the redirecting device.
• Last Redirect Number—Send the directory number of the last device to redirect the call.
• First Redirect Number (External)—Send the external directory number of the redirecting
device.
• Last Redirect Number (External)—Send the external directory number of the last device
to redirect the call.
Calling Party Presentation Choose whether the Cisco Unified Communications Manager transmits or blocks caller ID.
If you want the Cisco Unified Communications Manager to send caller ID, choose Allowed.
If you do not want the Cisco Unified Communications Manager to send caller ID, choose
Restricted.
Default specifies that caller ID does not get sent.
Display IE Delivery This check box enables delivery of the display information element (IE) in SETUP and
CONNECT messages for the calling and called party name delivery service.
The default setting checks this check box.
Redirecting Number IE
Delivery Outbound
Check this check box to indicate the first redirecting number and the redirecting reason of the
call when the call is forwarded. (The UUIE part of the outgoing SETUP message from the
Cisco Unified Communications Manager includes the Redirecting Number IE.)
Uncheck the check box to exclude the first redirecting number and the redirecting reason from
the outgoing SETUP message.
You use Redirecting Number IE for voice-messaging integration only. If your configured
voice-messaging system supports Redirecting Number IE, you should check the check box.
Note The default setting leaves this check box unchecked.
Redirecting Number IE
Delivery Inbound
Check this check box to accept the Redirecting Number IE in the incoming SETUP message
to the Cisco Unified Communications Manager. (The UUIE part of the SETUP message
includes the Redirecting Number IE.)
Uncheck the check box to exclude the Redirecting Number IE in the incoming SETUP
message to the Cisco Unified Communications Manager.
You use Redirecting Number IE for voice-messaging integration only. If your configured
voice-messaging system supports Redirecting Number IE, you should check the check box.
Note Default leaves the check box unchecked.
Table 91-1 Phone Configuration Settings (continued)
Field Description