B-1
Cisco Unified Communications Manager Administration Guide
OL-18611-01
APPENDIX
B
Configuring Non-Cisco Phones That Are Running
SIP
Cisco Unified Communications Manager supports Cisco Unified IP Phones with SIP as well as
RFC3261-compliant phones that are running SIP from third-party companies. This appendix describes
how to configure the third-party phones that are running SIP by using Cisco Unified Communications
Manager Administration.
This appendix contains the following sections:
• Where to Find More Information, page B-6
• Configuration Differences for Phones That Are Running SIP, page B-3
• Migrating from Cisco Unified Communications Manager Release 5.0 to Release 7.1(2), page B-5
• Where to Find More Information, page B-6
Configuration Checklist for Third-Party Phones That Are
Running SIP
Cisco Unified Communications Manager supports Cisco Unified IP Phones with SIP as well as
RFC3261-compliant phones that are running SIP from third-party companies.
Table B-1 provides steps
to manually configure a third-party phone that is running SIP by using Cisco Unified Communications
Manager Administration.
Table B-1 Configuration Checklist for Third-Party Phone That Is Running SIP
Configuration Steps Procedures and Related Topics
Step 1
Gather the following information about the phone:
• MAC address
• Physical location of the phone
• Cisco Unified Communications Manager user to associate
with the phone
• Partition, calling search space, and location information, if
used
• Number of lines and associated DNs to assign to the phone