Filter
Top Products
90-50
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Port Configuration Settings
Calling Search Space From the drop-down list box, choose the appropriate calling search
space. A calling search space designates a collection of route
partitions that are searched to determine how a collected
(originating) number should be routed.
You can configure the number of calling search spaces that display
in this drop-down list box by using the Max List Box Items
enterprise parameter. If more calling search spaces exist than the
Max List Box Items enterprise parameter specifies, the Find button
displays next to the drop-down list box. Click the Find button to
display the Find and List Calling Search Space window. Find and
choose a calling search space name (see the
“Finding a Calling
Search Space” section on page 53-3).
Note To set the maximum list box items, choose System >
Enterprise Parameters and choose CCMAdmin
Parameters.
AAR Calling Search Space Choose the appropriate calling search space for the device to use
when automated alternate routing (AAR) is performed. The AAR
calling search space specifies the collection of route partitions that
are searched to determine how to route a collected (originating)
number that is otherwise blocked due to insufficient bandwidth.
Prefix DN Enter the prefix digits that are appended to the digits that this
gateway receives on incoming calls.
The Cisco Unified Communications Manager adds prefix digits
after first truncating the number in accordance with the Num Digits
setting.
You can enter the international escape character +.
Call Routing Information - Outbound Calls
Calling Party Presentation Choose whether you want the Cisco Unified Communications
Manager to allow or restrict the display of the calling party phone
number.
Choose Default if you do not want to change calling line ID
presentation. Choose Allowed if you want Cisco Unified
Communications Manager to send “Calling Line ID Allowed” on
outbound calls. Choose Restricted if you want Cisco Unified
Communications Manager to send “Calling Line ID Restricted” on
outbound calls.
For more information about this field, see Table 17-8 in the “Calling
Party Number Transformations Settings” section in the Cisco
Unified Communications Manager System Guide.
Table 90-7 Digital Access PRI Port Configuration Settings (continued)
Field Description