Filter
Top Products
47-11
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 47 Hunt Pilot Configuration
Finding a Hunt Pilot
Finding a Hunt Pilot
Because you may have several hunt pilots in your network, Cisco Unified Communications Manager lets
you use specific criteria to locate specific hunt pilots. To locate hunt pilots, use the following procedure.
Note During your work in a browser session, Cisco Unified Communications Manager Administration retains
your hunt pilot search preferences. If you navigate to other menu items and return to this menu item,
Cisco Unified Communications Manager Administration retains your hunt pilot search preferences until
you modify your search or close the browser.
Called Party Numbering
Plan
Choose the format for the numbering plan in called party directory
numbers.
Cisco Unified Communications Manager sets the called DN numbering
plan. Cisco recommends that you do not change the default value unless
you have advanced experience with dialing plans such as NANP or the
European dialing plan. You may need to change the default in Europe
because Cisco Unified Communications Manager does not recognize
European national dialing patterns. You can also change this setting when
you are connecting to PBXs by using routing as a non-national type
number.
Choose one of the following options:
• Cisco Unified Communications Manager—Use when the Cisco
Unified Communications Manager sets the Numbering Plan in the
directory number.
• ISDN—Use when you are dialing outside the dialing plan for your
country.
• National Standard—Use when you are dialing within the dialing plan
for your country.
• Private—Use when you are dialing within a private network.
• Unknown—Use when the dialing plan is unknown.
AAR Group Settings
AAR Group Choose an Automated Alternate Routing (AAR) group from the
drop-down list box.
Note You can enable AAR for this hunt pilot only if all members of the
line group are in the same location.
External Number Mask Enter an external number mask value for the hunt pilot.
Cisco Unified Communications Manager uses this mask to format calling
line identification for external (outbound) calls. When AAR initiates a
reroute, the system applies this external number mask to the hunt pilot
number to form a fully qualified DN of the called party, which allows
AAR to reroute properly in out-of-bandwidth conditions.
Table 47-1 Hunt Pilot Configuration Settings (continued)
Field Description