Filter
Top Products
90-73
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Port Configuration Settings
Calling Party Transformation
CSS
This setting allows you to localize the calling party number on the
device. Make sure that the Calling Party Transformation CSS that
you choose contains the calling party transformation pattern that
you want to assign to this device.
Tip Before the call occurs, the device must apply the
transformation by using digit analysis. If you configure the
Calling Party Transformation CSS as None, the
transformation does not match and does not get applied.
Ensure that you configure the Calling Party Transformation
Pattern in a non-null partition that is not used for routing.
Geolocation From the drop-down list box, choose a geolocation.
You can choose the Unspecified geolocation, which designates that
this device does not associate with a geolocation.
You can also choose a geolocation that has been configured with the
System
> Geolocation Configuration menu option.
For an explanation of geolocations, including configuration details,
refer to
“Introducing Geolocations” and “Geolocation
Configuration” in the “Geolocations and Location Conveyance”
chapter in the Cisco Unified Communications Manager Features
and Services Guide.
For an overview and details of how logical partitioning uses
geolocations, refer to the
“Logical Partitioning” chapter in the Cisco
Unified Communications Manager Features and Services Guide.
Use Device Pool Calling Party
Transformation CSS
To use the Calling Party Transformation CSS that is configured in
the device pool that is assigned to this device, check this check box.
If you do not check this check box, the device uses the Calling Party
Transformation CSS that you configured in the PRI Port Gateway
Configuration window.
Calling Party Presentation Choose whether you want the Cisco Unified Communications
Manager to transmit or block caller ID.
Choose Default if you do not want to change calling party
presentation. Choose Allowed if you want Cisco Unified
Communications Manager to send caller ID. Choose Restricted if
you do not want Cisco Unified Communications Manager to send
caller ID.
Table 90-9 BRI Port Configuration Settings (continued)
Field Description