Filter
Top Products
90-36
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Port Configuration Settings
Use Device Pool Calling Party
Transformation CSS
To use the Calling Party Transformation CSS that is configured in
the device pool that is assigned to this device, check this check
box. If you do not check this check box, the device uses the
Calling Party Transformation CSS that you configured in the
Gateway Configuration window.
This settings displays for FXS ports, not FXO ports.
Multilevel Precedence and Preemption (MLPP) Information
MLPP Domain From the drop-down list box, choose an MLPP domain to
associate with this device. If you leave the value <None>, this
device inherits its MLPP domain from the value set for the device
pool for the device. If the device pool does not have an MLPP
Domain setting, this device inherits its MLPP Domain from the
value set for the MLPP Domain Identifier enterprise parameter.
MLPP Indication Be aware that this setting is not available for all devices. If
available, this setting specifies whether a device that can play
precedence tones will use the capability when it places an MLPP
precedence call.
From the drop-down list box, choose a setting to assign to this
device from the following options:
• Default—This device inherits its MLPP indication setting
from its device pool.
• Off—This device does not handle nor process indication of an
MLPP precedence call.
• On—This device does handle and process indication of an
MLPP precedence call.
Note Do not configure a device with the following combination
of settings: MLPP Indication is set to Off or Default (when
default is Off) while MLPP Preemption is set to Forceful.
Table 90-6 FXS/FXO Port Configuration Settings (continued)
Field Description