Filter
Top Products
9-13
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 9 Device Pool Configuration
Synchronizing a Device Pool With Affected Devices
Synchronizing a Device Pool With Affected Devices
To synchronize devices to a device pool that has undergone configuration changes, perform the following
procedure, which will apply any outstanding configuration settings in the least-intrusive manner
possible. (For example, a reset/restart may not be required on some affected devices.)
Procedure
Step 1 Choose System > Device Pool.
The Find and List Device Pools window displays.
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of Device Pools that match the search criteria.
Step 4 Click the Device Pool to which you want to synchronize applicable devices. The Device Pool
Information Configuration window displays.
Step 5 Make any additional configuration changes.
Step 6 Click Save.
Step 7 Click Apply Config.
The Apply Configuration Information dialog displays.
Step 8 Click OK.
Additional Information
See the “Related Topics” section on page 9-14.
Deleting a Device Pool
This section describes how to delete a device pool from the Cisco Unified Communications Manager
database.
Before You Begin
You cannot delete a device pool if any devices are assigned to it, if it is used for Device Defaults
configuration, or if it is the only device pool in the database. If you try to delete a device pool that is in
use, a message displays. Before deleting a device pool that is currently in use, you must perform either
or both of the following tasks:
• Update the devices to assign them to a different device pool. Refer to the “Deleting a Phone” section
on page 91-33.
• Delete the devices that are assigned to the device pool that you want to delete. Refer to the “Deleting
a Phone” section on page 91-33.
Procedure
Step 1 Find the device pool by using the procedure in the “Finding a Device Pool” section on page 9-10.