Filter
Top Products
8-10
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 8 Region Configuration
Related Topics
If you attempt to delete a region that is in use, Cisco Unified Communications Manager displays a
message. Before deleting a region that is currently in use, you must perform either or both of the
following tasks:
• Update the device pools to use a different region. See the “Configuring a Device Pool” section on
page 9-11.
• Delete the device pools that use the region that you want to delete. See the “Deleting a Device Pool”
section on page 9-13.
Procedure
Step 1 Find the region by using the procedure in the “Finding a Region” section on page 8-4.
Step 2 From the list of matching records, choose the region that you want to delete.
Step 3 To delete the region, click the Delete Selected icon that displays in the tool bar in the upper, left corner
of the window (or click the Delete Selected button that displays at the bottom of the window).
Tip The Region Configuration window displays an Items per page drop-down list box that allows you to list
25, 50, 100, 150, 200, or 250 configured regions. If you choose to display 100 or more regions, Cisco
Unified Communications Manager may experience performance degradation.
Additional Information
See the “Related Topics” section on page 8-10.
Related Topics
• Region Configuration Settings, page 8-1
• Finding a Region, page 8-4
• Configuring a Region, page 8-5
• Synchronizing a Region With Affected Devices, page 8-9
• Deleting a Region, page 8-9
• Regions, Cisco Unified Communications Manager System Guide
• Call Admission Control, Cisco Unified Communications Manager System Guide