Filter
Top Products
1-8
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 1 Introduction
Navigating the Cisco Unified Communications Manager Administration Application
Note If you choose Do not accept, the application does not display.
Note To view the certificate credentials before you continue, click Examine Certificate. Review the
credentials, and click Close.
Step 3 Click OK.
The Security Warning dialog box displays.
Step 4 Click OK.
Additional Information
See the “Related Topics” section on page 1-11.
Navigating the Cisco Unified Communications Manager
Administration Application
After you log on, the main Cisco Unified Communications Manager Administration window redisplays.
The window includes the drop-down list box in the upper, right corner called Navigation. To access the
applications in the drop-down list box, choose the program that you want and click Go.
Note The minimum supported screen resolution specifies 1024x768. Devices with lower screen resolutions
may not display the applications correctly.
The choices in the drop-down list box include the following Cisco Unified Communications Manager
applications:
• Cisco Unified Communications Manager Administration—Shows the default when you access
Cisco Unified Communications Manager. Use Cisco Unified Communications Manager
Administration to configure system parameters, route plans, devices, and much more.
• Cisco Unified Serviceability—Takes you to the main Cisco Unified Serviceability window that is
used to configure trace files and alarms and to activate and deactivate services.
• Cisco Unified OS Administration—Takes you to main Cisco Unified OS Administration window, so
you can configure and administer the Cisco Unified Communications Manager platform. You must
log off from any other application before you can log in to this application.
• Disaster Recovery System—Takes you to the Cisco Disaster Recovery System, a program that
provides full data backup and restore capabilities for all servers in a Cisco Unified Communications
Manager cluster. You must log off from any other application before you can log in to this
application.
After you log in to Cisco Unified Communications Manager Administration, you can access all
applications that display in the Navigation drop-down list box, except the Cisco Unified Operating
System Administration and Disaster Recovery System, without needing to log in to each application.
You cannot access the Cisco Unified Operating System Administration or Disaster Recovery System
GUIs with the same username and password that you use to access Cisco Unified Communications