Filter
Top Products
44-12
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 44 Route Pattern Configuration
Deleting a Route Pattern
Timesaver Assigning 8XXX to a gateway routes all directory numbers 8000 to 8999 out the gateway. Similarly,
82XX routes directory numbers 8200 to 8299. See the
“Special Characters and Settings” section in the
Cisco Unified Communications Manager System Guide for more information about wildcards.
Procedure
Step 1 Choose Call Routing > Route/Hunt > Route Pattern.
Step 2 Perform one of the following tasks:
• To copy an existing route pattern, locate the appropriate route pattern as described in the “Finding
a Route Pattern” section on page 44-10, click the Copy button next to the route pattern that you want
to copy, and continue with Step 3.
• To add a new route pattern, click the Add New button and continue with Step 3.
• To update an existing route pattern, locate the appropriate route pattern as described in the “Finding
a Route Pattern” section on page 44-10 and continue with Step 3.
Note If you change the gateway or route list, you must click Update prior to choosing the Edit link.
Otherwise, you get linked to the previous gateway or route list.
Step 3 In the Route Pattern Configuration window that displays, enter the appropriate settings as described in
Table 44-1.
Note The (Edit) link next to the Gateway or Route List field takes you to the Gateway Configuration
or Route List Configuration window for reference, depending on whether the Gateway or Route
List field contains a gateway or a route list. The Gateway Configuration window displays
devices that are associated with the specified gateway. The Route List Configuration window
displays the route groups that are associated with the specified route list.
Step 4 Click Save.
Additional Information
See the “Related Topics” section on page 44-13.
Deleting a Route Pattern
This section describes how to delete a route pattern.
Procedure
Step 1 Choose Call Routing > Route/Hunt > Route Pattern.
Step 2 Locate the route pattern that you want to delete. See the “Finding a Route Pattern” section on page 44-10.