Filter
Top Products
52-5
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 52 Partition Configuration
Searching for a Partition
If you are updating a partition, click Reset, or use the Apply Config button as described in the
“Synchronizing a Partition With Affected Devices” section on page 52-5. When you reset devices that
are associated with the partition, all calls on affected gateways drop.
Note You can configure multiple partitions. To enter multiple partitions, use one line for each partition
entry. You can enter up to 75 partitions; the names and descriptions can have a total of up to 1475
characters. Use a comma (,) to separate the partition name and description on each line. If you
do not enter a description, Cisco Unified Communications Manager uses the name as the
description.
Additional Information
See the “Related Topics” section on page 52-7.
Searching for a Partition
You can configure the number of partitions that display in this drop-down list box by using the Max List
Box Items enterprise parameter. If more partitions exist than the Max List Box Items enterprise
parameter specifies, the Find button displays next to the Partition drop-down list box on the Cisco
Unified Communications Manager Administration windows where the button appears. Click the Find
button to search for the partition that you want.
Procedure
Step 1 Click the Find button next to the Partition drop-down list box.
The Find and List Partitions window displays.
Step 2 In the Find partition where field, choose search criteria and enter a partial partition name.
Step 3 In the list of partitions that displays, click the desired partition name and click OK.
Additional Information
See the “Related Topics” section on page 52-7.
Synchronizing a Partition With Affected Devices
To synchronize devices with a partition that has undergone configuration changes, perform the following
procedure, which will apply any outstanding configuration settings in the least-intrusive manner
possible. (For example, a reset/restart may not be required on some affected devices.)
Procedure
Step 1 Choose Call Routing > Class of Control > Partition.
The Find and List Partitions window displays.