Filter
Top Products
69-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 69 Called Party Transformation Pattern Configuration
Called Party Transformation Pattern Configuration Settings
Additional Topics
See the “Related Topics” section on page 69-7.
Called Party Number
Type
Choose the format for the number type in called party directory numbers.
Cisco Unified Communications Manager sets the called party directory
number (DN) type. Cisco recommends that you do not change the default
value unless you have advanced experience with dialing plans such as NANP
or the European dialing plan. You may need to change the default in Europe
because Cisco Unified Communications Manager does not recognize
European national dialing patterns. You can also change this setting when you
are connecting to a PBX that expects the called directory number to be
encoded to a non national type numbering plan.
Choose one of the following options:
• Cisco Unified Communications Manager—Use when the Cisco Unified
Communications Manager sets the directory number type.
• Unknown—Use when the dialing plan is unknown.
• National—Use when you are dialing within the dialing plan for your
country.
• International—Use when you are dialing outside the dialing plan for your
country.
• Subscriber—Use when you are dialing a subscriber by using a shortened
subscriber number.
Called Party
Numbering Plan
Choose the format for the numbering plan in called party directory numbers.
Cisco Unified Communications Manager sets the called DN numbering plan.
Cisco recommends that you do not change the default value unless you have
advanced experience with dialing plans such as NANP or the European dialing
plan. You may need to change the default in Europe because Cisco Unified
Communications Manager does not recognize European national dialing
patterns. You can also change this setting when you are connecting to PBXs
by using routing as a non national type number.
Choose one of the following options:
• Cisco Unified Communications Manager—Use when the Cisco Unified
Communications Manager sets the Numbering Plan in the directory
number.
• ISDN—Use when you are dialing outside the dialing plan for your
country.
• National Standard—Use when you are dialing within the dialing plan for
your country.
• Private—Use when you are dialing within a private network.
• Unknown—Use when the dialing plan is unknown.
Table 69-1 Called Party Transformation Pattern Configuration Settings (continued)
Field Description