Filter
Top Products
8-9
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 8 Region Configuration
Synchronizing a Region With Affected Devices
Synchronizing a Region With Affected Devices
To synchronize devices with a Region that has undergone configuration changes, perform the following
procedure, which will apply any outstanding configuration settings in the least-intrusive manner
possible. (For example, a reset/restart may not be required on some affected devices.)
Procedure
Step 1 Choose System > Region.
The Find and List Regions window displays.
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of Regions that match the search criteria.
Step 4 Click the Region to which you want to synchronize applicable devices. The Region Configuration
window displays.
Step 5 Make any additional configuration changes.
Step 6 Click Save.
Step 7 Click Apply Config.
The Apply Configuration Information dialog displays.
Step 8 Click OK.
Additional Information
See the “Related Topics” section on page 8-10.
Deleting a Region
This section describes how to delete a region from the Cisco Unified Communications Manager
database.
Before You Begin
Note You cannot delete a region that any device pools are using.
To find out which device pools use the region, choose Dependency Records from the Related Links
drop-down list box on the Region Configuration window and click Go.
If the dependency records feature is not enabled for the system, the dependency records summary
window displays a message that shows the action that you can take to enable the dependency records;
the message also displays information about high CPU consumption that is related to the dependency
records feature. For more information about dependency records, see the
“Accessing Dependency
Records” section on page A-2.