Filter
Top Products
65-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 65 Meet-Me Number/Pattern Configuration
Finding a Meet-Me Number/Pattern
Additional Topics
See the “Related Topics” section on page 65-5.
Finding a Meet-Me Number/Pattern
Because you might have several meet-me numbers/patterns in your network, Cisco Unified
Communications Manager lets you locate specific meet-me numbers/patterns on the basis of specific
criteria. Use the following procedure to locate meet-me numbers/patterns.
Partition To use a partition to restrict access to the meet-me/number pattern,
choose the desired partition from the drop-down list box.
If you do not want to restrict access to the meet-me number/pattern,
choose <None> for the partition. Refer to the
“Partition Configuration”
section on page 52-1 for more information.
You can configure the number of partitions that display in this
drop-down list box by using the Max List Box Items enterprise
parameter. If more partitions exist than the Max List Box Items
enterprise parameter specifies, the Find button displays next to the
drop-down list box. Click the Find button to display the Find and List
Partitions window. Find and choose a partition name (see the
“Finding a
Partition” section on page 52-3).
Note To set the maximum list box items, choose System >
Enterprise Parameters and update the Max List Box Items
field under CCMAdmin Parameters.
Note Make sure that the combination of meet-me number/pattern and
partition is unique within the Cisco Unified Communications
Manager cluster.
Minimum Security Level Choose the minimum Meet-Me conference security level for this
meet-me number or pattern from the drop-down list box.
• Choose Authenticated to block participants with nonsecure phones
from joining the conference.
• Choose Encrypted to block participants with authenticated or
nonsecure phones from joining the conference.
• Choose Non Secure to allow all participants to join the conference.
Note To invoke this feature, ensure you have a secure conference
bridge that is configured and available. Refer to the Cisco
Unified Communications Manager Security Guide for more
information.
Table 65-1 Meet-Me Number/Pattern Configuration Settings (continued)
Field Description