Filter
Top Products
40-8
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 40 SIP Dial Rules Configuration
Resetting a SIP Dial Rule
Resetting a SIP Dial Rule
Perform the following procedure to reset or restart the phone that is running SIP when the SIP dial rule
gets updated, so the phone gets updated with the new SIP dial rule.
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Call Routing > Dial Rules >
SIP Dial Rules.
Step 2 Locate the SIP dial rule that you want to reset. See the “Finding a SIP Dial Rule” section on page 40-3.
Step 3 Click the SIP dial rule that you want to reset.
The SIP Dial Rule Configuration window displays.
Step 4 Click Reset.
The Device Reset dialog displays.
Step 5 Click one of the following choices:
• Restart—Restarts the chosen devices without shutting them down (reregisters the phones with
Cisco Unified Communications Manager).
• Reset—Shuts down, then restarts, the device.
• Close—Closes the Reset Device dialog without performing any action.
Additional Information
See the “Related Topics” section on page 40-9.
Synchronizing Configuration of a SIP Dial Rule with Affected SIP
Phones
To synchronize a SIP phone with a SIP Dial Rule that has undergone configuration changes, perform the
following procedure, which will apply any outstanding configuration settings in the least-intrusive
manner possible. (For example, a reset/restart may not be required on some affected SIP phones.)
Procedure
Step 1 Choose Device > Dial Rules> SIP Dial Rule.
The Find and List SIP Dial Rules window displays.
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of SIP Dial Rules that match the search criteria.
Step 4 Click the SIP Dial Rule to which you want to synchronize applicable SIP phones. The SIP Dial Rule
Configuration window displays.
Step 5 Make any additional configuration changes.