Filter
Top Products
CHAPTER
43-1
Cisco Unified Communications Manager Administration Guide
OL-18611-01
43
Route List Configuration
A route list associates a set of route groups in a specified priority order. A route list then associates with
one or more route patterns and determines the order in which those route groups are accessed. The order
controls the progress of the search for available devices for outgoing calls.
A route list can contain only route groups.
Each route list should have at least one route group. Each route group includes at least one device, such
as a gateway, that is available. Based on device type, Cisco Unified Communications Manager can
choose some, or all, ports as resources in each route group. Some devices, such as digital access, only
allow you to choose all ports.
You can add a Route Group to any number of Route Lists.
Use the following topics to add or remove route lists or to add, remove, or change the order of route
groups in a route list:
• Finding Route Lists, page 43-1
• Adding a Route List, page 43-2
• Adding Route Groups to a Route List, page 43-4
• Removing Route Groups from a Route List, page 43-5
• Changing the Order of Route Groups in a Route List, page 43-6
• Synchronizing a Route List With Affected Route Groups, page 43-6
• Deleting a Route List, page 43-7
Finding Route Lists
Because you might have several route lists in your network, Cisco Unified Communications Manager
lets you use specific criteria to locate specific route lists. To locate route lists, use the following
procedure.
Note During your work in a browser session, Cisco Unified Communications Manager Administration retains
your route list search preferences. If you navigate to other menu items and return to this menu item,
Cisco Unified Communications Manager Administration retains your route list search preferences until
you modify your search or close the browser.