Filter
Top Products
102-7
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 102 Common Device Configuration
Configuring a Common Device Configuration
Configuring a Common Device Configuration
To add a common device configuration for a device, use the following procedure.
Procedure
Step 1 Choose Device > Device Settings > Common Device Configuration.
The Find and List Common Device Configurations window displays.
Step 2 Perform one of the followings tasks:
• To add a new common device configuration, click the Add New button and continue with Step 3.
• To update an existing common device configuration, locate the appropriate common device
configuration as described in
“Finding a Common Device Configuration” section on page 102-6 and
continue with Step 3.
Step 3 Enter the appropriate settings as described in Table 102-1.
Step 4 Click Save.
Additional Information
See the “Deleting a Common Device Configuration” section on page 102-8.
Synchronizing a Common Device Configuration With Affected
Devices
To synchronize devices with a common device configuration that has undergone configuration changes,
perform the following procedure, which will apply any outstanding configuration settings in the
least-intrusive manner possible. (For example, a reset/restart may not be required on some affected
devices.)
Procedure
Step 1 Choose Device > Device Settings > Common Device Configuration.
The Find and List Common Device Configurations window displays.
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of common device configurations that match the search criteria.
Step 4 Click the common device configuration to which you want to synchronize applicable devices. The
Common Device Configuration Information window displays.
Step 5 Make any additional configuration changes.
Step 6 Click Save.
Step 7 Click Apply Config.
The Apply Configuration Information dialog displays.