Filter
Top Products
60-7
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 60 Translation Pattern Configuration
Translation Pattern Configuration Settings
Connected Party Transformations
Connected Line ID
Presentation
Cisco Unified Communications Manager uses connected line ID
presentation (COLP/COLR) as a supplementary service to allow or
restrict the called party phone number on a call-by-call basis.
Choose whether you want Cisco Unified Communications Manager to
allow or restrict the display of the connected party phone number on the
calling party phone display for this translation pattern.
Choose Default if you do not want to change the connected line ID
presentation. Choose Allowed if you want to display the connected party
phone number. Choose Restricted if you want Cisco Unified
Communications Manager to block the display of the connected party
phone number.
For more information about this field, see Table 17-11 in the “Connected
Party Presentation and Restriction Settings” section in the Cisco Unified
Communications Manager System Guide.
Connected Name
Presentation
Cisco Unified Communications Manager uses connected name
presentation (CONP/CONR) as a supplementary service to allow or
restrict the called party name on a call-by-call basis.
Choose whether you want Cisco Unified Communications Manager to
allow or restrict the display of the connected party name on the calling
party phone display for this translation pattern.
Choose Default if you do not want to change the connected name
presentation. Choose Allowed if you want to display the connected party
name. Choose Restricted if you want Cisco Unified Communications
Manager to block the display of the connected party name.
For more information about this field, see Table 17-11 in the “Connected
Party Presentation and Restriction Settings” section in the Cisco Unified
Communications Manager System Guide.
Called Party Transformations
Discard Digits Choose the discard digits instructions that you want to be associated with
this translation pattern. Refer to the
“Discard Digits Instructions” section
in the Cisco Unified Communications Manager System Guide for more
information.
Note The discard digits that display depend on the numbering plan that
you choose from the Numbering Plan drop-down list box.
Called Party Transform
Mask
Enter a transformation mask value. Valid entries for the NANP include
the digits 0 through 9, and the wildcard characters asterisk (*) and
octothorpe (#); the international escape character +; and blank. If the
field is blank, no transformation takes place. The dialed digits get sent
exactly as dialed.
Table 60-1 Translation Pattern Configuration Settings (continued)
Field Description