Filter
Top Products
83-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 83 Cisco Voice-Mail Port Configuration
Cisco Voice-Mail Port Configuration Settings
Use Trusted Relay Point From the drop-down list box, enable or disable whether Cisco Unified
Communications Manager inserts a trusted relay point (TRP) device
with this media endpoint. Choose one of the following values:
• Default—If you choose this value, the device uses the Use Trusted
Relay Point setting from the common device configuration with
which this device associates.
• Off—Choose this value to disable the use of a TRP with this
device. This setting overrides the Use Trusted Relay Point setting
in the common device configuration with which this device
associates.
• On—Choose this value to enable the use of a TRP with this device.
This setting overrides the Use Trusted Relay Point setting in the
common device configuration with which this device associates.
A Trusted Relay Point (TRP) device designates an MTP or transcoder
device that is labeled as Trusted Relay Point.
Cisco Unified Communications Manager places the TRP closest to the
associated endpoint device if more than one resource is needed for the
endpoint (for example, a transcoder or RSVPAgent).
If both TRP and MTP are required for the endpoint, TRP gets used as
the required MTP. See
“TRP Insertion in Cisco Unified
Communications Manager” in the Cisco Unified Communications
Manager System Guide for details of call behavior.
If both TRP and RSVPAgent are needed for the endpoint, Cisco Unified
Communications Manager first tries to find an RSVPAgent that can
also be used as a TRP.
If both TRP and transcoder are needed for the endpoint, Cisco Unified
Communications Manager first tries to find a transcoder that is also
designated as a TRP.
Refer to the “Trusted Relay Point” section and its subtopics in the
Media Resource Management chapter of the Cisco Unified
Communications Manager System Guide for a complete discussion of
network virtualization and trusted relay points.
Directory Number Information
Directory Number Enter the number that is associated with this voice-mail port. Make sure
that this field is unique in combination with the Partition field.
Table 83-1 Cisco Voice-Mail Port Configuration Settings (continued)
Field Description