Filter
Top Products
91-36
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 91 Cisco Unified IP Phone Configuration
Configuring IP Phone Services
Step 4 On the upper, right side of the window, choose Subscribe/Unsubscribe Services from the Related Links
drop-down list box and click Go.
The Subscribed IP phone services window displays for this phone.
Step 5 From the Select a Service drop-down list box, choose the service that you want to add to the phone.
Step 6 Click Next.
The window displays with the service that you chose. If you want to choose a different service, click
Back and repeat
Step 5.
Step 7 If the service has required parameters, enter that information into the field that is provided.
Step 8 Click Subscribe.
The service displays in the Subscribed Services list.
Step 9 If you want to subscribe to additional services, click the Subscribe a New Service link in the Subscribed
Services area. Repeat
Step 5 through Step 8.
Additional Information
See the “Related Topics” section on page 91-42.
Updating Services
Perform the following steps to update a service. You can update the service name and service parameter
values, if necessary.
Procedure
Step 1 Choose Device > Phone.
The Find and List Phones window displays.
Step 2 To locate a specific phone, enter search criteria and click Find.
A list of phones that match the search criteria displays.
Step 3 Choose the phone for which you want to update a service.
The Phone Configuration window displays.
Step 4 On the upper, right side of the window, choose Subscribe/Unsubscribe Services from the Related Links
drop-down list box and click Go.
Step 5 From the Subscribed Services list, choose a service.
Step 6 Update the appropriate parameter and click Save.
Additional Information
See the “Related Topics” section on page 91-42.