Filter
Top Products
91-38
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 91 Cisco Unified IP Phone Configuration
Copy to a Remote Destination Profile
• Configure the service URL button on the phone button template. For more information, see the
“Configuring Phone Button Templates” section on page 98-3.
• Subscribe to the service. See the “Configuring IP Phone Services” section on page 91-35.
Procedure
Step 1 Choose Device > Phone.
The Find and List Phones window displays.
Step 2 To locate a specific phone, enter search criteria and click Find.
A list of phones that match the search criteria displays.
Step 3 Choose the phone to which you want to add a service URL button.
The Phone Configuration window displays.
Step 4 In the Association Information area on the left side of the Phone Configuration window, click the Add
a new SURL link.
The Configure Service URL Buttons window displays for this phone.
Step 5 From the Button Service drop-down list box, choose the service that you want to add to or update for the
phone.
Step 6 You can change the values in the Label and ASCII Label fields.
Step 7 To add the service to or update for the phone button, click Save.
Step 8 If more buttons and services are available, you can assign additional services to additional buttons by
repeating
Step 5 through Step 7.
Step 9 To close this window and return to the Phone Configuration window, click Close.
Additional Information
See the “Related Topics” section on page 91-42.
Copy to a Remote Destination Profile
You can copy information from a phone record to a new remote destination profile, which is used for
Mobile Connect and Mobile Voice Access. See
Cisco Unified Mobility in the Cisco Unified
Communications Manager Features and Services Guide for instructions on configuring remote
destination profiles.
Procedure
Step 1 From the Phone Configuration window, choose Copy to Remote Destination Profile from the Related
Links drop-down list box at the top of the window and click Go.
The Remote Destination Profile Configuration window displays for this phone.
Step 2 Enter the appropriate settings as described in “Cisco Unified Mobility” in the Cisco Unified
Communications Manager Features and Services Guide.