Filter
Top Products
72-5
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 72 Annunciator Configuration
Resetting an Annunciator
Tip When you add a Cisco Unified Communications Manager server, the annunciator for the sever
will automatically get added to the database. After you activate the Cisco IP Voice Media
Streaming Application service, the annunciator device registers with Cisco Unified
Communications Manager.
Step 3 Click the annunciator that you want to update and continue with Step 4.
Step 4 Enter the appropriate settings as described in Table 72-1.
Step 5 Click Save.
Step 6 Be sure the Cisco IP Voice Media Streaming Application service has been activated. For information on
activating services, refer to the Cisco Unified Serviceability Administration Guide.
Additional Information
See the “Related Topics” section on page 72-6.
Accessing Dependency Records
To find which devices are using the annunciator, choose Dependency Records from the Related Links
drop-down list menu and click Go. If the dependency records are not enabled for the system, the
dependency records summary window displays a message. For more information about dependency
records, see the
“Accessing Dependency Records” section on page A-2.
Resetting an Annunciator
To reset an annunciator, perform the following procedure:
Procedure
Step 1 Locate the annunciator by using the procedure in the “Finding an Annunciator” section on page 72-3.
Step 2 Click the annunciator that you want to reset.
Step 3 Click the Reset button.
Step 4 The Device Reset Window displays. To continue, click Reset.
Additional Information
See the “Related Topics” section on page 72-6.
Synchronizing an Annunciator
To synchronize an annunciator with the most recent configuration changes, perform the following
procedure, which will apply any outstanding configuration settings in the least-intrusive manner
possible. (For example, a reset/restart may not be required on some affected devices.)