Filter
Top Products
94-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 94 Device Defaults Configuration
Updating Device Defaults
Before You Begin
Before updating the device defaults, perform any of the following tasks that apply to your system:
• Add new firmware files for the devices to the TFTP server.
• If you use device defaults to assign a firmware load that does not exist in the directory, those devices
will fail to load the assigned firmware.
• Configure new device pools. See the “Configuring a Device Pool” section on page 9-11.
• If the device is a phone, configure new phone templates. See the “Configuring Phone Button
Templates” section on page 98-3.
Table 94-1 describes the configuration settings for device defaults. For more information about related
procedures, see the “Related Topics” section on page 94-3.
Updating Device Defaults
This section describes how to modify the device defaults in the Cisco Unified Communications Manager
configuration database.
Before You Begin
Before updating the device defaults, perform any of the following tasks that apply to your system:
• Add new firmware files for the devices to the TFTP server.
• If you use device defaults to assign a firmware load that does not exist in the directory, those devices
will fail to load the assigned firmware.
• Configure new device pools. See the “Configuring a Device Pool” section on page 9-11.
• If the device is a phone, configure new phone templates. See the “Configuring Phone Button
Templates” section on page 98-3.
Table 94-1 Device Defaults Configuration Settings
Field Name Description
Device Type This field displays the type of device for which device defaults can be
set.
Protocol This field displays the protocol that the corresponding device in the
Device Type column uses.
Load Information Enter the ID number of the firmware load that is used with a particular
type of hardware device. If you install an upgrade or patch load, you
must update the load information for each type of device that uses the
new load.
Device Pool Choose the device pool that is associated with each type of device.
The device pool defines common characteristics for all devices in the
pool.
Phone Template Choose the phone button template that each type of Cisco Unified IP
Phone uses. The template defines what keys on the phone perform
that function.