Filter
Top Products
45-9
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 45 Line Group Configuration
Removing Members from a Line Group
Procedure
Step 1 Choose Call Routing > Route/Hunt > Line Group.
Step 2 Locate the line group to which you want to add a member. See the “Finding a Line Group” section on
page 45-6.
Step 3 If you need to locate a directory number, choose a route partition from the Partition drop-down list box,
enter a search string in the Directory Number Contains field, and click Find. To find all directory
numbers that belong to a partition, leave the Directory Number Contains field blank and click Find.
A list of matching directory numbers displays in the Available DN/Route Partition list box.
Step 4 In the Available DN/Route Partition list box, choose a directory number to add and click Add to Line
Group to move it to the Selected DN/Route Partition list box. Repeat this step for each member that you
want to add to this line group.
Step 5 In the Selected DN/Route Partition list box, choose the order in which the new directory number(s) is to
be accessed in this line group. To change the order, click a directory number and use the Up and Down
arrows to the right of the list box to change the order of directory numbers.
Step 6 Click Save to add the new directory numbers and to update the directory number order for this line
group.
Additional Information
See the “Related Topics” section on page 45-10.
Removing Members from a Line Group
You can remove members from a new line group or from an existing line group. The following procedure
describes removing a directory number from an existing line group.
Procedure
Step 1 Choose Call Routing > Route/Hunt > Line Group.
Step 2 Locate the line group from which you want to remove a directory number. See the “Finding a Line
Group” section on page 45-6.
Step 3 In the Selected DN/Route Partition list box, choose a directory number to be deleted and click the down
arrow below the list box to move the directory number to the Removed DN/Route Partition list box.
Repeat this step for each member that you want to remove from this line group.
Step 4 To remove the members, click Save.
Additional Information
See the “Related Topics” section on page 45-10.