Filter
Top Products
91-22
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 91 Cisco Unified IP Phone Configuration
Phone Configuration Settings
MLPP Indication If available, this setting specifies whether a device that can play precedence tones will use the
capability when it places an MLPP precedence call.
From the drop-down list box, choose a setting to assign to this device from the following
options:
• Default—This device inherits its MLPP indication setting from its device pool.
• Off—This device does not handle nor process indication of an MLPP precedence call.
• On—This device does handle and process indication of an MLPP precedence call.
Note Do not configure a device with the following combination of settings: MLPP
Indication is set to Off or Default (when default is Off) while MLPP Preemption is set
to Forceful.
Note Turning on MLPP Indication (at the enterprise parameter, device pool, or device level)
disables normal Ring Setting behavior for the lines on a device, unless MLPP
Indication is turned off (overridden) for the device.
MLPP Preemption Be aware that this setting is not available on all devices. If available, this setting specifies
whether a device that can preempt calls in progress will use the capability when it places an
MLPP precedence call.
From the drop-down list box, choose a setting to assign to this device from the following
options:
• Default—This device inherits its MLPP preemption setting from its device pool.
• Disabled—This device does not allow preemption of lower precedence calls to take place
when necessary for completion of higher precedence calls.
• Forceful—This device allows preemption of lower precedence calls to take place when
necessary for completion of higher precedence calls.
Note Do not configure a device with the following combination of settings: MLPP
Indication is set to Off or Default (when default is Off) while MLPP Preemption is set
to Forceful.
Do Not Disturb (DND)
Do Not Disturb Check this check box to enable Do Not Disturb on the phone.
DND Option When you enable DND on the phone, this parameter allows you to specify how the DND
features handle incoming calls:
• Call Reject—This option specifies that no incoming call information gets presented to
the user. Depending on how you configure the DND Incoming Call Alert parameter, the
phone may play a beep or display a flash notification of the call.
• Ringer Off—This option turns off the ringer, but incoming call information gets
presented to the device, so the user can accept the call.
• Use Common Phone Profile Setting—This option specifies that the DND Option setting
from the Common Phone Profile window will get used for this device.
Note For 7940/7960 phones that are running SCCP, you can only choose the Ringer Off
option. For mobile devices and dual-mode phones, you can only choose the Call Reject
option. When you activate DND Call Reject on a mobile device or dual-mode phone,
no call information gets presented to the device.
Table 91-1 Phone Configuration Settings (continued)
Field Description