Filter
Top Products
90-69
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Port Configuration Settings
BRI Port Configuration Settings
Table 90-9 provides detailed descriptions for BRI port configuration settings.
Table 90-9 BRI Port Configuration Settings
Field Description
Device Information
End-Point Name (MGCP
gateways)
For MGCP gateways, this display-only field contains a string that
Cisco Unified Communications Manager generates that uniquely
identifies the MGCP endpoint.
For example
BRI/S1/SU0/P0@SC3640.cisco.com
S1 indicates slot 1, SU0 indicates subunit 0, P0 indicates port 0, and
@SC3640.cisco.com designates the MGCP domain name.
Description Enter a description that clarifies the purpose of the device.
Device Pool From the drop-down list box, choose the appropriate device pool.
For this device, the device pool specifies a collection of properties
that includes Communications Manager Group, Date/Time Group,
Region, and Calling Search Space for auto-registration of devices.
Common Device Configuration From the drop-down list box, choose the common device
configuration you want to use for this gateway. The common device
configuration determines softkey template, MOH, and MLPP
settings.
Call Classification This parameter determines whether an incoming call that is using
this gateway is considered off the network (OffNet) or on the
network (OnNet).
When the Call Classification field is configured as Use System
Default, the setting of the Cisco Unified Communications Manager
clusterwide service parameter, Call Classification, determines
whether the gateway is OnNet or OffNet.
This field provides an OnNet or OffNet alerting tone when the call
is OnNet or OffNet, respectively.
Network Locale From the drop-down list box, choose the locale that is associated
with the gateway. The network locale identifies a set of detailed
information to support the hardware in a specific location. The
network locale contains a definition of the tones and cadences that
devises use in a specific geographic area.
Packet Capture Mode (for Cisco
IOS MGCP gateways only)
Configure this field only when you need to troubleshoot encrypted
signaling information for the Cisco IOS MGCP gateway.
Configuring packet capturing may cause call-processing
interruptions. For more information on this field, refer to the Cisco
Unified Communications Manager Security Guide.