Filter
Top Products
74-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 74 Media Termination Point Configuration
Synchronizing a Media Termination Point
Before You Begin
Make sure that the following prerequisites are met before you proceed with the steps:
• Ensure servers are configured.
• Ensure device pools are configured.
Note You can have only one Media Termination Point device for each Cisco Unified Communications
Manager server. When a Cisco Unified Communications Manager Server is added, a media termination
point device automatically gets created for the server but is not available for use until the Cisco IP Voice
Media Streaming App service gets activated.
Procedure
Step 1 Perform one of the following tasks:
• To add a Media Termination Point, choose Media Resources > Media Termination Point. The
Find and List Media Termination Point window displays. Click Add New.
• To copy a Media Termination Point, choose Media Resources > Media Termination Point. The
Find and List Media Termination Point window displays. Click the Copy icon next to the media
termination point that you want to copy.
• To update a Media Termination Point, locate the media termination point by using the procedure in
the
“Finding a Media Termination Point” section on page 74-2.
Step 2 Enter the appropriate settings as described in Table 74-1.
Step 3 Click Save.
Additional Information
See the “Related Topics” section on page 74-6.
Synchronizing a Media Termination Point
To synchronize a Media Termination Point with the most recent configuration changes, perform the
following procedure, which will apply any outstanding configuration settings in the least-intrusive
manner possible. (For example, a reset/restart may not be required on some affected devices.)
Procedure
Step 1 Choose Media Resources > Media Termination Point.
The Find and List a Media Termination Points window displays.
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of a Media Termination Points that match the search criteria.
Step 4 Check the check boxes next to the Media Termination Points that you want to synchronize. To choose
all Media Termination Points in the window, check the check box in the matching records title bar.