Filter
Top Products
91-34
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 91 Cisco Unified IP Phone Configuration
Configuring Speed-Dial Buttons or Abbreviated Dialing
Step 3 Perform one of the following actions:
• Check the check boxes next to the phones that you want to delete and click Delete Selected.
• Delete all the phones in the window by clicking Select All and clicking Delete Selected.
• Choose the name of the phone that you want to delete from the list to display its current settings and
click Delete.
A confirmation dialog displays.
Step 4 Click OK.
Additional Information
See the “Related Topics” section on page 91-42.
Configuring Speed-Dial Buttons or Abbreviated Dialing
You use Cisco Unified Communications Manager Administration to configure speed-dial buttons for
phones if you want to provide speed-dial buttons for users or if you are configuring phones that do not
have a specific user who is assigned to them. Users use Cisco Unified CM User Options to change the
speed-dial buttons on their phones.
Table 91-2 describes the speed-dial button and abbreviated dialing configuration settings. The Speed
Dial and Abbreviated Dial Configuration window contains the following sections: speed-dial settings on
the phone and abbreviated-dial settings that are not associated with a button. The descriptions in
Table 91-2 apply to both sections.
The system provides a total of 99 speed-dial and abbreviated-dial settings.
Speed Dial Settings
Configure these settings for the physical buttons on the phone.
Abbreviated Dial Settings
Configure these settings for the speed-dial numbers that you access with abbreviated dialing. When the
user configures up to 99 speed-dial entries, part of the speed-dial entries can get assigned to the
speed-dial buttons on the IP phone; the remaining speed-dial entries get used for abbreviated dialing.
When a user starts dialing digits, the AbbrDial softkey displays on the phone, and the user can access
any speed-dial entry by entering the appropriate index (code) for abbreviated dialing.
Note Not all Cisco Unified IP Phones support abbreviated dialing. Refer to the phone user guide for
information.
Procedure
Step 1 From the Phone Configuration window, choose Add/Update Speed Dials from the Related Links
drop-down list box at the top of the window and click Go.
The Speed Dial and Abbreviated Dial Configuration window displays for this phone.