Filter
Top Products
97-6
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 97 Device Profile Configuration
Device Profile Configuration Settings
DND Incoming Call Alert When you enable the DND Ringer Off or Call Reject option, this
parameter specifies how a call displays on a phone.
From the drop-down list, choose one of the following options:
• None—This option specifies that the DND Incoming Call Alert
setting from the Common Phone Profile window will get used for
this device.
• Disable—This option disables both beep and flash notification of
a call but for the DND Ringer Off option, incoming call
information still gets displayed. For the DND Call Reject option,
no call alerts display and no information gets sent to the device.
• Beep Only—For an incoming call, this option causes the phone to
play a beep tone only.
• Flash Only—For an incoming call, this option causes the phone to
display a flash alert.
Expansion Module Information
Module 1 You can configure one or two expansion modules for this device profile
by choosing phone templates from the expansion module drop-down
lists in the expansion module fields.
Note You can view a phone button list at any time by choosing the
View button list link next to the phone button template fields.
A separate dialog box pops up and displays the phone buttons
for that particular expansion module.
Choose the appropriate expansion module or None.
Module 2 Choose the appropriate expansion module or None.
Multilevel Precedence and Preemption
MLPP Domain If this user device profile will be used for MLPP precedence calls,
choose the MLLP Domain from the drop-down list box.
Note You define MLPP domains in the MLPP Domain Configuration
window. For access, choose System
> MLPP Domain.
Table 97-1 Device Profile Configuration Settings (continued)
Field Description