Filter
Top Products
97-9
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 97 Device Profile Configuration
Configuring a Device Profile
Before You Begin
Make sure that phone button template(s) are already configured before proceeding with the steps. See
the
“Configuring Phone Button Templates” section on page 98-3 for more information.
Procedure
Step 1 Choose Device > Device Settings > Device Profile.
The Find and List Device Profile window displays.
Step 2 Perform one of the followings tasks:
• To copy an existing device profile, locate the appropriate device profile as described in “Finding a
Device Profile” section on page 97-8, click the Copy button next to the device profile that you want
to copy and continue with Step 5.
• To add a new device profile, click the Add New button. The Device Profile Configuration window
displays. Continue with
Step 3.
• To update an existing device profile, locate the appropriate device profile as described in “Finding
a Device Profile” section on page 97-8, and continue with Step 5.
Note Before updating a device profile, make sure that the device profile that you want to update is
configured in Cisco Unified Communications Manager.
Step 3 From the Device Profile Type drop-down list box, choose a device type. Click Next.
Step 4 If the Select the device profile protocol drop-down list box displays, choose the protocol for the device
profile. Click Next.
Step 5 Enter the appropriate settings as described in Table 97-1.
Step 6 Click Save.
Step 7 From the Association Info pane, you can configure directory numbers, speed dials, and intercom
directory numbers for the device profile. Refer to the
“Directory Number Configuration” section on
page 64-1, the “Cisco Unified IP Phone Configuration” section on page 91-1, and the “Intercom
Directory Number Configuration” section on page 56-1 for the appropriate settings as described in these
sections.
Step 8 If you click Modify Button Items, the Reorder Phone Button Configuration window opens. Use this
window if you need to manage the phone button template button items. Refer to the
“Modifying Phone
Button Template Button Items” section on page 91-39 for the appropriate settings for this window.
Note You must log in to a device for changes to a user device profile to take effect.