Filter
Top Products
92-15
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 92 Trunk Configuration
Trunk Configuration Settings
Prefix DN Enter the prefix digits that are appended to the called party number
on incoming calls.
Cisco Unified Communications Manager adds prefix digits after
first truncating the number in accordance with the Significant Digits
setting.
You can enter the international escape character +.
Redirecting Number IE Delivery
- Inbound
Check this check box to accept the Redirecting Number IE in the
incoming SETUP message to the Cisco Unified Communications
Manager. (The UUIE part of the SETUP message includes the
Redirecting Number IE.)
Uncheck the check box to exclude the Redirecting Number IE.
You use Redirecting Number IE for voice-messaging integration
only. If your configured voice-messaging system supports
Redirecting Number IE, you should check the check box.
Note Default leaves the check box checked. You cannot check
this check box if you choose the QSIG option from the
Tunneled Protocol drop-down list box.
Enable Inbound FastStart Check this check box to enable the H.323 FastStart call connections
on incoming calls.
By default, the check box remains unchecked for the H.323
gateway.
For intercluster calls, you must check the Enable Inbound FastStart
check box on Cisco Unified Communications Manager servers in
other clusters for the outbound FastStart feature to work.
Outbound Calls
Called Party Transformation
CSS
This setting allows you to localize the called party number on the
device. Make sure that the Called Party Transformation CSS that
you choose contains the called party transformation pattern that you
want to assign to this device.
Note If you configure the Called Party Transformation CSS as
None, the transformation does not match and does not get
applied. Ensure that you configure the Called Party
Transformation CSS in a non-null partition that is not used
for routing.
Use Device Pool Called Party
Transformation CSS
To use the Called Party Transformation CSS that is configured in the
device pool that is assigned to this device, check this check box. If
you do not check this check box, the device uses the Called Party
Transformation CSS that you configured for this device in the Trunk
Configuration window.
Table 92-1 Trunk Configuration Settings for H.225 and Intercluster Trunks (continued)
Field Description