Filter
Top Products
65-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 65 Meet-Me Number/Pattern Configuration
Configuring a Meet-Me Number/Pattern
Configuring a Meet-Me Number/Pattern
This section describes how to add, copy and update a Meet-Me Number/Pattern.
Before You Begin
Make sure that the following prerequisites are met before proceeding with the steps:
• Configure the server(s). Refer to the “Server Configuration” section on page 2-1.
• Configure the device pools. Refer to the “Device Pool Configuration” section on page 9-1.
Procedure
Step 1 Choose Call Routing > Meet-Me Number/Pattern.
Step 2 Perform one of the followings tasks:
• To copy an existing Meet-Me Number/Pattern, locate the appropriate Meet-Me Number/Pattern as
described in
“Finding a Meet-Me Number/Pattern” section on page 65-2. Click the Meet-Me
Number/Pattern that you want to copy. The Meet-Me Number/Pattern Configuration window
displays. Click Copy and continue with
Step 3.
• To add a Meet-Me Number/Pattern, click the Add New button and continue with Step 3.
• To update an existing Meet-Me Number/Pattern, locate the appropriate Meet-Me Number/Pattern as
described in
“Finding a Meet-Me Number/Pattern” section on page 65-2. Click the Meet-Me
Number/Pattern that you want to update, and continue with Step 3.
Note You can change the number or pattern as needed (example, changing 5000 to 500X).
Step 3 Enter the appropriate settings as described in Table 65-1.
Step 4 Click Save.
Additional Topics
See the “Related Topics” section on page 65-5.
Deleting a Meet-Me Number/Pattern
This section describes how to delete a Meet-Me Number/Pattern.
Before You Begin
Make sure that the following prerequisites are met before proceeding with the steps:
• Configure the servers.
• Configure the device pools.
• Configure the meet-me number/pattern.