Filter
Top Products
4-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 4 Cisco Unified Communications Manager Group Configuration
Configuring a Cisco Unified Communications Manager Group
Configuring a Cisco Unified Communications Manager Group
This section describes how to add, copy, or update a Cisco Unified Communications Manager group.
Before You Begin
Before configuring a Cisco Unified Communications Manager group, you must configure the Cisco
Unified Communications Managers that you want to assign as members of that group. See the
“Updating
a Cisco Unified Communications Manager” section on page 3-6 for more information.
Procedure
Step 1 Choose System > Cisco Unified CM Group.
The Find and List Cisco Unified CM Groups window displays.
Step 2 Perform one of the following tasks:
• To copy an existing Cisco Unified Communications Manager Group, locate the appropriate Cisco
Unified Communications Manager Group as described in the
“Finding a Cisco Unified
Communications Manager Group” section on page 4-3, choose the Cisco Unified Communications
Manager Group that you want to copy, click Copy and continue with Step 3.
• To add a new Cisco Unified Communications Manager Group, click Add New and continue with
Step 3.
• To update an existing Cisco Unified Communications Manager Group, locate the appropriate Cisco
Unified Communications Manager Group as described in the
“Finding a Cisco Unified
Communications Manager Group” section on page 4-3 and continue with Step 3.
Step 3 Enter the appropriate settings as described in Table 4-1.
Step 4 Click the Save icon that displays in the tool bar in the upper, left corner of the window (or click the Save
button that displays at the bottom of the window) to save the Cisco Unified Communications Manager
Group configuration in the database.
After you have configured the Cisco Unified Communications Manager Group, you can use it to
configure device pools. Devices obtain their Cisco Unified Communications Manager Group list setting
from the device pool to which they are assigned.
Additional Information
See the “Related Topics” section on page 4-6.
Synchronizing a Cisco Unified Communications Manager Group
with Affected Devices
To synchronize a Cisco Unified Communications Manager Group that has undergone recent
configuration changes their associated registered devices, perform the following procedure, which will
apply any outstanding configuration settings in the least-intrusive manner possible. (For example, a
reset/restart may not be required on some affected devices.