Filter
Top Products
90-12
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Gateway Configuration Settings
Call Routing Information - Outbound Calls
Calling Party Selection Any outbound call on a gateway can send directory number
information. Choose which directory number is sent:
• Originator—Send the directory number of the calling device.
• First Redirect Number—Send the directory number of the
redirecting device.
• Last Redirect Number—Send the directory number of the last
device to redirect the call.
• First Redirect Number (External)—Send the directory number of
the first redirecting device with the external phone mask applied.
• Last Redirect Number (External)—Send the directory number of
the last redirecting device with the external phone mask applied.
Calling Party Presentation Choose whether you want the Cisco Unified Communications Manager
to allow or restrict the display of the calling party phone number.
Choose Default if you do not want to change calling line ID
presentation. Choose Allowed if you want Cisco Unified
Communications Manager to send “Calling Line ID Allowed” on
outbound calls. Choose Restricted if you want Cisco Unified
Communications Manager to send “Calling Line ID Restricted” on
outbound calls.
For more information about this field, see Table 17-8 in the “Calling
Party Number Transformations Settings” section in the Cisco Unified
Communications Manager System Guide.
Table 90-2 H.323 Gateway Configuration Settings (continued)
Field Description