Filter
Top Products
84-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 84 Cisco Voice Mail Port Wizard
Adding a New Cisco Voice-Mail Server and Ports
Step 8 Click Next.
The Cisco Voice Mail Directory Numbers window displays.
Step 9 Enter the directory number settings for the new Cisco voice-mail server as described in Table 84-2.
Table 84-2 Voice Mail Port Wizard Directory Number Configuration Settings
Field Description
Beginning Directory
Number
Enter the number that people call to access the Cisco voice-mail server.
Each new port receives the next available directory number.
Partition Choose the partition to which this set of directory numbers belong. Choose
None if partitions are not used. If you choose a partition, you must choose
a calling search space that includes that partition.
You can configure the number of partitions that display in this drop-down
list box by using the Max List Box Items enterprise parameter. If more
partitions exist than the Max List Box Items enterprise parameter
specifies, the Find button displays next to the drop-down list box. Click
the Find button to display the Find and List Partitions window. Find and
choose a partition name (see the
“Finding a Partition” section on
page 52-3).
Note To set the maximum list box items, choose System > Enterprise
Parameters and choose CCMAdmin Parameters.
Calling Search Space From the drop-down list box, choose the appropriate calling search space.
A calling search space comprises a collection of partitions that are
searched for numbers that are called from this directory number.
If you choose a partition, you must choose a calling search space that
includes that partition.
You can configure the number of calling search spaces that display in this
drop-down list box by using the Max List Box Items enterprise parameter.
If more calling search spaces exist than the Max List Box Items enterprise
parameter specifies, the Find button displays next to the drop-down list
box. Click the Find button to display the Find and List Calling Search
Space window. Find and choose a calling search space name (see the
“Finding a Calling Search Space” section on page 53-3).
Note To set the maximum list box items, choose System > Enterprise
Parameters and choose CCMAdmin Parameters.
AAR Group Choose the automated alternate routing (AAR) group for this device. The
AAR group provides the prefix digits that are used to route calls that are
otherwise blocked due to insufficient bandwidth. An AAR group setting of
None specifies that no rerouting of blocked calls will be attempted.
Internal Caller ID Display This field indicates text that displays on the calling party phone when a
call is placed to this line.
Internal Caller ID Display
(ASCII format)
This field indicates text that displays on the calling party phone, in ASCII
format, when a call is placed to this line.