Filter
Top Products
52-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 52 Partition Configuration
Partition Configuration Settings
Table 52-1 Partition Configuration Settings
Field Description
Partition Information
(Partition Name,
Description)
Enter a name in the partition name and description box. Ensure each
partition name is unique to the route plan. Partition names can contain
alphanumeric characters, as well as spaces, hyphens (-), and underscore
characters (_).
Note The length of the partition names limits the maximum number of
partitions that can be added to a calling search space.
Table 52-2
provides examples of the maximum number of partitions that
can be added to a calling search space if partition names are of
fixed length.
Follow the partition name by a comma (,); then, enter a description on
the same line as the Partition Name. If you do not enter a description,
Cisco Unified Communications Manager automatically enters the
partition name in this field.
Use a new line for each partition and description.
Time Schedule From the drop-down list box, choose a time schedule to associate with
this partition. The associated time schedule specifies when the partition
is available to receive incoming calls.
The default value specifies None, which implies that time-of-day routing
is not in effect and the partition remains active at all times.
In combination with the Time Zone value in the following field,
association of a partition with a time schedule configures the partition
for time-of-day routing. The system checks incoming calls to this
partition against the specified time schedule.
Time Zone Choose one of the following options to associate a partition with a time
zone:
• Originating Device—If you choose this option, the system checks the
partition against the associated time schedule with the time zone of the
calling device.
• Specific Time Zone—If you choose this option, choose a time zone
from the drop-down list box. The system checks the partition
against the associated time schedule at the time that is specified in
this time zone.
These options all specify the Time Zone. When an incoming call occurs,
the current time on the Cisco Unified Communications Manager gets
converted into the specific time zone set when one option is chosen. The
system validates this specific time against the value in the Time
Schedule field.