Filter
Top Products
47-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 47 Hunt Pilot Configuration
Hunt Pilot Configuration Settings
Route Option The Route Option designation indicates whether you want this hunt pilot
to be used for routing calls (such as 9.@ or 8[2-9]XX) or for blocking
calls. Choose the Route this pattern or Block this pattern radio button.
If you choose the Block this pattern radio button, you must choose the
reason for which you want this hunt pilot to block calls. Choose a value
from the drop-down list box:
• No Error
• Unallocated Number
• Call Rejected
• Number Changed
• Invalid Number Format
• Precedence Level Exceeded
Provide Outside Dial Tone Provide Outside Dial Tone indicates that Cisco Unified Communications
Manager routes the calls off the local network. Check this check box for
each hunt pilot that routes the call off the local network and provides
outside dial tone to the calling device. To route the call in the network,
leave the check box unchecked.
Urgent Priority If the dial plan contains overlapping hunt lists, Cisco Unified
Communications Manager would not route the call until the interdigit
timer expires (even if it is possible to dial a sequence of digits to choose
a current match). Check this check box to interrupt interdigit timing
when Cisco Unified Communications Manager must route a call
immediately.
Table 47-1 Hunt Pilot Configuration Settings (continued)
Field Description