Filter
Top Products
44-8
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 44 Route Pattern Configuration
Route Pattern Configuration Settings
Connected Name
Presentation
Cisco Unified Communications Manager uses connected name presentation
(CONP/CONR) as a supplementary service to allow or restrict the called party
name on a call-by-call basis.
Choose whether you want Cisco Unified Communications Manager to allow
or restrict the display of the connected party name on the calling party phone
display for this route pattern.
Choose Default if you do not want to change the connected name presentation.
Choose Allowed if you want to display the connected party name. Choose
Restricted if you want Cisco Unified Communications Manager to block the
display of the connected party name.
For more information about this field, see Table 17-11 in the “Connected Party
Presentation and Restriction Settings” section in the Cisco Unified
Communications Manager System Guide.
Called Party Transformations
Discard Digits From the Discard Digits drop-down list box, choose the discard digits
instructions that you want to associate with this route pattern. The discard
digits that display depend on the numbering plan that you choose from the
Numbering Plan drop-down list box. See the
“Discard Digits Instructions”
section in the Cisco Unified Communications Manager System Guide for more
information on discard instructions for the North American Numbering Plan.
Note The called party transformation settings that are assigned to the route
groups in a route list override any called party transformation settings
that are assigned to a route pattern that is associated with that route
list.
Called Party
Transform Mask
Enter a transformation mask value. Valid entries for the NANP include the
digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#);
the international escape character +; and blank. If the field is blank, no
transformation takes place. Cisco Unified Communications Manager sends the
dialed digits exactly as dialed.
Prefix Digits
(Outgoing Calls)
Enter prefix digits in the Prefix Digits (Outgoing Calls) field. Valid entries for
the NANP include the digits 0 through 9; the wildcard characters asterisk (*)
and octothorpe (#); the international escape character +; and blank.
Note The appended prefix digit does not affect which directory numbers
route to the assigned device.
Table 44-1 Route Pattern Configuration Settings (continued)
Field Description