Filter
Top Products
60-3
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 60 Translation Pattern Configuration
Translation Pattern Configuration Settings
MLPP Precedence Choose an MLPP precedence setting for this translation pattern from the
drop-down list box:
• Executive Override—Highest precedence setting for MLPP calls.
• Flash Override—Second highest precedence setting for MLPP calls.
• Flash—Third highest precedence setting for MLPP calls.
• Immediate—Fourth highest precedence setting for MLPP calls.
• Priority—Fifth highest precedence setting for MLPP calls.
• Routine—Lowest precedence setting for MLPP calls.
• Default—Does not override the incoming precedence level but
rather lets it pass unchanged.
Note Refer to the “Precedence” section in the “Multilevel Precedence
and Preemption” chapter of the Cisco Unified Communications
Manager Features and Services Guide for more information.
Resource-Priority
Namespace Network
Domain
Choose an already configured Resource-Priority Namespace Network
Domain from the drop-down list box.
Calling Search Space From the drop-down list box, choose the calling search space for which
you are adding a translation pattern, if necessary.
You can configure the number of calling search spaces that display in this
drop-down list box by using the Max List Box Items enterprise
parameter. If more calling search spaces exist than the Max List Box
Items enterprise parameter specifies, the Find button displays next to the
drop-down list box. Click the Find button to display the Find and List
Calling Search Space window. Find and choose a calling search space
name (see the
“Finding a Calling Search Space” section on page 53-3).
Note To set the maximum list box items, choose System > Enterprise
Parameters and choose CCMAdmin Parameters.
Route Option The Route Option designation indicates whether you want this
translation pattern to be used for routing calls (such as 9.@ or 8[2-9]XX)
or for blocking calls. Choose the Route this pattern or Block this pattern
radio button.
If you choose the Block this pattern radio button, you must choose the
reason for which you want this translation pattern to block calls. Choose
a value from the drop-down list box:
• No Error
• Unallocated Number
• Call Rejected
• Number Changed
• Invalid Number Format
• Precedence Level Exceeded
Table 60-1 Translation Pattern Configuration Settings (continued)
Field Description